cld-ct1256.003 product family data sheet cree ? p4 led cp41a-rds/ads cp41a-rfs/afs cp41a-rhs/ahs www.cree.com/hb copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. features ? size (mm): 7.6 x 7.6 ? color and typical dominant wavelength: red (624nm) amber(591nm) ? luminous flux ( mlm ) cp41a-rds:(4400-8730) cp41a-rfs:(4400-8730) cp41a-rhs:(4400-8730) cp41a-ads:(4400-11000) cp41a-afs:(4400-11000) cp41a-ahs:(4400-11000) ? lead - free ? rohs compliant cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/xlamp copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 applications ? channel letter ? amusement product description this revolutionary package design allows the lighting designer to reduce the number of leds required and provide a more uniform and unique illuminated appearance than with other led solutions. this is possible through the effcient optical-package design and high- current capabilities. the low-profle package can be easily coupled with refectors or lenses to effciently distribute light and provide the desired lit appearance. this product family employs green and blue led materials, which allows designers to match the color of many lighting applications such as vehicle signal lamps and amusement lighting.
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 2 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 2 cree p4 led cp41a-rds/ads cp41a-rfs/rfs cp41a-rhs/ahs absolute maximum ratings (t a = 25c) items symbol absolute maximum rating unit red/amber forward current i f 70 note1 ma peak forward current note2 i fp 100 ma reverse voltage v r 5 v power dissipation p d (red) 238 mw p d (amber) 224 mw operation temperature t opr -40 ~ +100 c storage temperature t stg -40 ~ +100 c lead soldering temperature t sol max. 260c for 5 sec. max. (3 mm from the base of the epoxy bulb) electrostatic discharge classifcation (mil-std-883e) esd class 2 note: 1. a heat sink is recommended if the device is operated at ambient temperatures higher than 25c. 2. pulse width 0.1 msec, duty 1/10. typical electrical & optical characteristics (t a = 25c) characteristics color symbol condition unit minimum typical maximum forward voltage red v f i f = 70 ma v 2.3 3.2 amber v f i f = 70 ma v 2.5 3.2 reverse current red/amber i r v r = 5 v a 100 dominant wavelength red d i f = 70 ma nm 620 624 630 amber d i f = 70 ma nm 587 591 596 luminous flux red cp41a-rds (40 degree) v i f = 70 ma mlm 4400 5500 cp41a-rfs (70 degree) v i f = 70 ma mlm 4400 6000 cp41a-rhs (100 degree) v i f = 70 ma mlm 4400 6500 amber cp41a-ads (40 degree) v i f = 70 ma mlm 4400 6200 cp41a-afs (70 degree) v i f = 70 ma mlm 4400 6600 cp41a-ahs (100 degree) v i f = 70 ma mlm 4400 7200 50% power angle cp41a-rds/ads 2? i f = 70 ma deg 40 cp41a-rfs/afs 2? i f = 70 ma deg 70 cp41a-rhs/ahs 2? i f = 70 ma deg 100
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 3 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 3 cree p4 led cp41a-rds/ads cp41a-rfs/rfs cp41a-rhs/ahs ? ? vf bin limit (i f = 70 ma ) ? cp41a-rds/rfs/rhs (40/70/100 degree) bin code min.(mlm) max.(mlm) l0 4400 5500 m0 5500 6600 n0 6600 8730 red amber amber bin code min.(v) max.(v) 23 2.0 2.2 24 2.2 2.4 25 2.4 2.6 26 2.6 2.8 27 2.8 3.0 28 3.0 3.2 red bin code min.(nm) max.(nm) rj 620 630 amber bin code min.(nm) max.(nm) a3 587 590 a4 590 593 a5 593 596 flux bin limit (i f = 70 ma ) color bin limit (i f = 70 ma ) red bin code min.(v) max.(v) 23 2.0 2.2 24 2.2 2.4 25 2.4 2.6 26 2.6 2.8 27 2.8 3.0 28 3.0 3.2 cp41a-ads/afs/ahs (40/70/100 degree) bin code min.(mlm) max.(mlm) l0 4400 5500 m0 5500 6600 n0 6600 8730 p0 8730 11000
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 4 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 4 cree p4 led cp41a-rds/ads cp41a-rfs/rfs cp41a-rhs/ahs order code table* color kit number viewing angle luminous flux (mlm) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) red cp41a-rds-cl0n0jj4 40 4400 8730 rj 620 rj 630 color kit number viewing angle luminous flux (mlm) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) red cp41a-rfs-cl0n0jj4 70 4400 8730 rj 620 rj 630 color kit number viewing angle luminous flux (mlm) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) red cp41a-rhs-cl0n0jj4 100 4400 8730 rj 620 rj 630 red cp41a-rhs-cm0n0jj4 100 5500 8730 rj 620 rj 630 color kit number viewing angle luminous flux (mlm) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) amber cp41a-ads-cl0p0354 40 4400 11000 a3 587 a5 596 amber cp41a-ads-cl0p0454 40 4400 11000 a4 590 a5 596 color kit number viewing angle luminous flux (mlm) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) amber CP41A-AFS-CL0P0354 70 4400 11000 a3 587 a5 596 amber cp41a-afs-cl0p0454 70 4400 11000 a4 590 a5 596 amber cp41a-afs-cm0p0354 70 5500 11000 a3 587 a5 596 color kit number viewing angle luminous flux (mlm) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) amber cp41a-ahs-cl0p0354 100 4400 11000 a3 587 a5 596 amber cp41a-ahs-cm0p0354 100 5500 11000 a3 587 a5 596 amber cp41a-ahs-cm0p0454 100 5500 11000 a4 590 a5 596 notes: 1. the above kit numbers represent order codes which include multiple fux-bin and color-bin codes. only one fux-bin code and one color-bin code will be shipped on each reel. and single fux-bin code,single color bin-codes will not be orderable. 2. please refer to the cree led lamp reliability test standards document for reliability test conditions. 3. please refer to the cree led lamp soldering & handling document for information about how to use this led product safely.
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 5 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 5 cree p4 led cp41a-rds/ads cp41a-rfs/rfs cp41a-rhs/ahs graphs the above data are collected from statistical fgures that do not necessarily correspond to the actual parameters of each single led. hence, these data will be changed without further notice. fig.2 relative luminous flux vs. if(ma) forward current if(ma) vf(v) forward voltage. fig.1 forward current vs. if (ma) 0.0 0.25 1.0 0.5 0.75 1.25 60 20 40 100 80 0 0 60 20 40 100 80 40 20 80 60 100 0 ta( c) red amber fig.5 red & amber maximum forward dc current vs ambient temperature (tjmax=110 c) vs. reverse voltage. fig.3 red & amber reverse current fig.6 far field pattern -90 -60 -30 0 0 0 0.5 1.0 fig.4 relative luminous intensity vs. wavelength. 30 60 90 50% power angle : 40 2.8 2.0 2.4 2.2 2.6 3.0 20.0 40.0 80.0 60.0 100.0 0.0 red amber angle -10 -50 vr(v) -30 -40 -20 -40 ir(ua) -50 -30 -20 -10 0 -60 (relative luminous intensity) wl(nm) 80% 20% 40% 60% 0% 100% 700 300 500 400 600 800 red amber cp41a-rds/ads (relative luminous flux) (relative luminous intensity)
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 6 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 6 cree p4 led cp41a-rds/ads cp41a-rfs/rfs cp41a-rhs/ahs fig.7 far field pattern 50% power angle : 70 fig.8 far field pattern -90 -60 -30 0 0 0 0.5 1.0 30 60 90 50% power angle : 100 angle cp41a-rfs/afs cp41a-rhs/ahs (relative luminous intensity) (relative luminous intensity) -90 -60 -30 0 0 0 0.5 1.0 30 60 90 angle
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 7 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 7 cree p4 led cp41a-rds/ads cp41a-rfs/rfs cp41a-rhs/ahs mechanical dimensions all dimensions are in mm. tolerance is 0.25 mm unless otherwise noted. an epoxy meniscus may extend about 1.5 mm down the leads. burr around bottom of epoxy may be 0.5 mm max. notes rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or other - wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2002/95/ ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim users should be cautioned not to stare at the light of this led product. the bright light can damage the eye. cp41a-rds/ads: cp41a-rfs/afs:
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 8 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 8 cree p4 led cp41a-rds/ads cp41a-rfs/rfs cp41a-rhs/ahs mechanical dimensions all dimensions are in mm. tolerance is 0.25 mm unless otherwise noted. an epoxy meniscus may extend about 1.5 mm down the leads. burr around bottom of epoxy may be 0.5 mm max. rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or other - wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2002/95/ ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim users should be cautioned not to stare at the light of this led product. the bright light can damage the eye. notes cp41a-rhs/ahs:
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 9 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 9 cree p4 led cp41a-rds/ads cp41a-rfs/rfs cp41a-rhs/ahs kit number system all dimensions in mm. cree led lamps are tested and sorted into performance bins. a bin is specifed by ranges of color, forward voltage, and brightness. sorted leds are packaged for shipping in various convenient options. please refer to the cree led lamp packaging standard document for more information about shipping and packaging options. cree leds are sold by order codes in combinations of bins called kits. order codes are confgured in the following man - ner:
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 10 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 10 cree p4 led cp41a-rds/ads cp41a-rfs/rfs cp41a-rhs/ahs packaging features: ? the leds are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. ? cardboard boxes will be used to protect the leds from mechanical shock during transportation. ? the boxes are not water resistant, and they must be kept away from water and moisture. ? the tube pack type of packaging. ? max 60 pcs per tube. h u e xx ax xxx xxx xx x x c o l o r l e d l a mp j o w axxxxx - xx - xxx l xxxx x xxx - xxx l ot t ype xxx xxx vf xx iv x r a nk q t y p cs r r
|
